Pressure Measurement
Melt Pressure Measurement
Temperature Measurement
Position measurement
Level measurement
Level Sensor & Transmitter
Flow measurement
XPT Series Explosion Proof Melt Pressure Transmitter
Introduction
DWEL XPT Series are explosion-proof melt pressure transmitters with 4~20 mA output and HART protocol, specifically designed for use in hazardous environments. Constructed with a full stainless steel welded structure, this series offers both thread and flange installation options. The use of high-performance core components ensures exceptional measurement accuracy and reliability. The XPT Series is widely utilized for melt pressure control in high-precision polymer extrusion equipment, production lines, and laboratory instruments. It serves as an ideal replacement for Dynisco, Gefran, and Graeff systems.
Features
●4-20mA, 4-20mA+Hart output
●Fully welded housing optional
●0-35 to 0-2000 bar / 0-500 to 0-30000 psi
●CE, Ex and other electrical safety and explosion-proof tests
●Temperature compensation
●Flange installation
Specifications
|
Pressure range |
0~35 to 2000bar(0~500 to 0~30000psi) |
|
Accuracy |
±0.25% FS, ±0.5% FS |
|
Repeatability |
0.2% FS,0.4%, 0.8% FS |
|
Input excitation |
24Vdc recommended, 12-30Vdc |
|
Output signal |
4~20mA, 4~20mA+HART |
|
Maximum diaphragm temperature |
662F° (350℃) for rigid stem 752F °(400℃) for flexible |
|
Environment temperature |
-20℃~85℃ |
|
Zero shift due to temperature change |
20 psi/100℃ 0.15MPa/100℃ |
|
Process connection |
1/2-20 UNF, Flange |
|
Maximum Overload Pressure Rating |
1.5 x FS(<1000bar) 1.2 x FS(>1000bar) |
|
Pressure Units |
PSI, Bar, MPa or Kg/cm2 |
|
Internal Shunt Calibration |
80% FSO |
|
Diaphragm |
17-4PH, Inconel718, C276 |
|
Diaphragm coating |
TiAlN |
|
Electrical Connection |
1/2NPT leading wire, 6PIN |
|
Max Torque |
30Nm(22lbf ft) |
|
30Nm(22lbf ft) |
E,J,K type or Pt100 |
|
protection |
IP65 |
|
Explosion proof certification |
ExiaII CT4,ExiaII CT6 |
